HBFITES Data Center, Collaboration, Security, Storage, Wireless, Telepresence Training +91-9886770046 info@hbfites.com

DCUCS v3.0 - Configuring Data Center Unified Computing Training

Description

The Configuring Data Center Unified Computing course is a 5-day product training course designed to familiarize data center engineers, architects and Cisco partners with the Cisco UCS B-series and C-series products.

This course prepares individuals for implementing and maintaining Cisco UCS hardware with a strong emphasis on best practices. The Configuring Data Center Unified Computing course also addresses relevant additional features added by Version 2.1 Cisco UCS Software Release.

Objectives

Upon completing this course, the learner will be able to meet these overall objectives:

  • Describe the Cisco UCS architecture
  • Describe Cisco UCS LAN connectivity configuration
  • Describe Cisco UCS B-Series SAN connectivity configuration
  • Describe how to configure and manage the servers within Cisco UCS
  • Describe how to configure Cisco UCS virtualization
  • Describe how to configure Cisco UCS administration
  • Describe Cisco UCS C-Series features

Prerequisites

The knowledge and skills that a learner must have before attending this course are as follows:

  • General knowledge of servers
  • Routing and switching knowledge
  • Storage area networking knowledge
  • Server virtualization knowledge

Who Should Attend

Overall this course is primarily aimed at customer network engineers and administrators whose interest is focused around configuration of product features. Server administrators working with hypervisor networking are also target audiences for this course.

  • The primary audience includes data center engineers, data center administrators, and system engineers.
  • The secondary audience includes data center managers, network engineers, and consulting system engineers.
  • The tertiary audience includes data center architects, network managers, and program and project managers.

Outline

Course Introduction

  • Overview
  • Course Goal and Objectives
  • Course Flow
  • Additional References
  • Your Training Curriculum

Module 1: Cisco UCS Architecture

      Lesson 1: Describing Cisco UCS B-Series Blade Server Hardware Components
      • The Logical View of the Cisco UCS Architecture
      • Cisco UCS Manager and Cisco UCS Central Software
      • Cisco UCS 5100 Series Blade Server Chassis
      • Cisco UCS B-Series Components
      • Cisco UCS B-Series Blade Servers
      • Cisco UCS B-Series Power Requirements
      • How to Determine Supported Configurations
      • Summary
      Lesson 2: Describing Cisco UCS User Interfaces
      • Cisco UCS Manager GUI
      • Cisco UCS Manager Navigation Panel
      • The External Management Framework
      • The Finite State Machine
      • Fault Detection and Correction Using the Cisco UCS Manager
      • How to Connect to Cisco UCS Manager CLI Shells
      • Summary
      Lesson 3: Configuring Cisco UCS B-Series Physical Connectivity and High Availability
      • Cisco UCS Cluster Connection Requirements
      • Initial Cisco Fabric Interconnect Cluster Setup
      • Modify Cisco UCS Cluster IP Addressing from the GUI
      • The Discovery Process and Monitoring Using FSM Output
      • I/O Uplinks and Bandwidth Oversubscription with the Cisco UCS 2204/2208XP
      • Intercluster Communications and Synchronization of the Cisco UCS Manager Database
      • How the Cisco UCS 5108 SEEPROM Resolves Split-Brain Issues in the High-Availability Cluster
      • Summary
      Lesson 4: Using RBAC and Organizations
      • RBAC Framework in the Cisco UCS
      • Configure Local Users, Roles, and Privileges
      • Configure Organizations and Locales
      • Determine the Effective Rights of a User as an Intersection of Roles and Locales
      • Privileges of the Server-Profile Role
      • Summary
      Lesson 5: Module Summary
      • References
    Lesson 6: Module Self-Check


Module 2: Cisco UCS LAN Connectivity

      Lesson 1: Configuring Compute Node LAN Connectivity
      • Configure Port Personality Mode and Unified Port Types on the Cisco UCS 6200 Series Fabric Extenders
      • Unified Uplink Ports and Uplink Port Channels
      • Configure Port Channels to Northbound Switches (LACP) or Appliances (Static)
      • Configure Port Channels on Southbound Chassis Links (Cisco UCS 2200XP Series Fabric Extenders)
      • Ethernet End-Host Mode vs. Switching Mode
      • Automatic Pinning and Recovery from Failure
      • Configure VLANs
      • Configure Organization-Aware VLANs
      • Configure VLAN Port Count Optimization
      • Configure VLAN Groups and Permissions
      • Summary
      Lesson 2: Configuring LAN Identity and Resource Pools
      • The Benefits of Creating Identity and Resource Pools
      • Configure MAC Pools
      • Configure IP Pools
      • ID Pool Sequential Allocation
      • Summary
      Lesson 3: Configuring Compute Node LAN Policies
      • Service Profiles and Policies in Cisco UCS Manager
      • Configure Flow Control Policies Under the Root Organization
      • Configure Multicast Policies Under the Root Organization
      • The Default vNIC Behavior Policy
      • Configure LAN Connectivity Policies
      • Configure Network Control Policies
      • Configure QoS Policies
      • Configure Threshold Policies
      • Configure vNIC Templates
      • Summary

 

      Lesson 4: Module Summary
      • References
    Lesson 5: Module Self-Check


Module 3: Cisco UCS SAN Connectivity

      Lesson 1: Configuring Compute Node SAN Connectivity
      • Configure Fibre Channel Ports on Cisco UCS Fabric Interconnects
      • Configure VSANs and FCoE VLANs
      • Fibre Channel Protocol Addressing and Fibre Channel Switching
      • Fibre Channel End-Host Mode and N-Port Virtualization
      • Configure Fibre Channel Switching Mode
      • Configure Multihop FCoE
      • Configure SAN Connectivity Policies
      • Configure the Default vHBA Behavior Policy
      • Multipath I/O in Cisco UCS
      • Summary
      Lesson 2: Configuring Advanced Compute Node SAN Connectivity
      • Configure Fibre Channel Zoning
      • Cisco UCS Support for Discovery of PCIe-Based Flash I/O Devices
      • Cisco UCS Provides Unified Storage Ports
      • Summary
      Lesson 3: Configuring SAN Identity and Resource Pools
      • Provision Resource Pools in Cisco UCS Manager
      • Configure WWN Pools
      • Configure IQN Pools
      • Summary
      Lesson 4: Module Summary
      • References
    Lesson 5: Module Self-Check


Module 4: Configuring Cisco UCS B-Series Servers

      Lesson 1: Configuring Server Identity and Resource Pools
      • Configure UUID Pools
      • Configure Server Pools
      • Summary
      Lesson 2: Configuring Server Policies
      • Configure General Policies
      • Configure Host Firmware Packages
      • Configure a BIOS Policy to Enable Virtualization Features
      • Configure an Adapter Policy for VM-FEX
      • Configure Virtual Connection Assignment and Distribution
      • Configure Boot Policies
      • Configure Maintenance Policies
      • Configure Power Control Policies
      • Configure Scrub Policies
      • Summary
      Lesson 3: Configuring Templates and Service Profiles
      • Purpose and Benefits of Service Profiles
      • Purpose and Benefits of Service Profile Templates
      • Service Profile Template Types
      • Configure a Template in the Expert Service Profile Wizard
      • Rename a Service Profile
      • Clone a Service Profile
      • Summary
      Lesson 4: Managing Service Profiles
      • Associating and Disassociating a Service Profile to a Server Blade
      • Changes to a Service Profile that Trigger a Cisco PNuOS Update
      • Planning the Organization Where a Service Profile Is Created
      • Moving a Service Profile to a New Server Blade in the Event of Hardware Failure
      • Management IP Address, KVM, and Virtual Media
      • Supported Operating Systems and Boot Options
      • Summary
      Lesson 5: Configuring Logical Service Profiles that Boot from iSCSI
      • Configure a Service Profile That Boots from iSCSI
      • Configure an iSCSI Adapter Policy
      • Configure an IQN Pool
      • Configure an iSCSI Authentication Profile
      • Configure and Boot ESXi
      • Configure and Boot Windows Server 2012
      • Configure and Boot Red Hat Enterprise Linux
      • Summary
      Lesson 6: Module Summary
        References
    Lesson 7: Module Self-Check


Module 5: Configuring Cisco UCS Virtualization

      Lesson 1: Configuring Cisco UCS VM-FEX
      • Virtualization and VMs
      • Configure a VM-FEX Driver
      • Support for vSphere 5.1
      • vCenter Integration Methods
      • Provision the Secure Connection from the Cisco UCS Manager to a VMware vCenter Server
      • Provision Port Profiles and Port Profile Clients
      • Provision a Dynamic vNIC Connection Policy and BIOS Policy for Cisco VM-FEX
      • Process to Join ESXi Hosts to the DVS
      • Provision VMs to Consume Port Groups on the DVS
      • Summary
      Lesson 2: Configuring Cisco UCS SR-IOV
      • SR-IOV and Extending the Physical Network to the VMs
      • Service Profile, Adapter and BIOS Policy, and SR-IOV vNICs Configuration
      • Port Profile and DVS (Cluster) VM Tab Configuration
      • Summary
      Lesson 3: Configuring Cisco UCS VM-FEX Integration for Microsoft Windows Server 2012 Hyper-V
      • Microsoft Windows Server 2012 Hyper-V Requirements
      • Create and Attach a Dynamic vNIC Connection Policy
      • Management via PowerShell and Standalone GUI
      • Summary
      Lesson 4: Configuring the Cisco UCS VM-FEX for KVM SR-IOV
      • Linux Rx Data Path on Multi-CPU Systems for Single-Queuing Adapters and RSS-Capable Multiqueuing Adapters
      • Support MRQS on Linux
      • Summary
      Lesson 5: Module Summary
        References
    Lesson 6: Module Self-Check


Module 6: Cisco UCS Administration

      Lesson 1: Backing Up and Restoring the Cisco UCS Manager Database
      • Cisco UCS Backup and Restore Functions
      • Supported Backup Types and Functions
      • Import Operations and Disaster Recovery Restore Operations
      • Configuring a Backup Job
      • Verify Backup Creation and Execution
      • Scheduled Backups
      • Configure an Import Job to Restore the AAA User Database
      • Configure Cisco UCS Fabric Interconnects for a Disaster Recovery Restore Operation
      • Summary
      Lesson 2: Managing and Upgrading Cisco UCS B-Series Firmware
      • Updating Cisco UCS B-Series Firmware
      • Install Infrastructure Firmware
      • Install Server Firmware
      • Firmware Cross-Version Support
      • Direct Firmware Upgrade of Cisco IMC, IOMs, and Mezzanine Adapters
      • Firmware Updates Using a Service Profile
      • Firmware Auto Install
      • Cisco UCS Manager Upgrade Validation
      • Differences Between Firmware Processes Used by Cisco UCS Fabric Interconnects and Cisco IMC, IOMs, and Adapters
      • Fault Suppression
      • Summary
      Lesson 3: Using Cisco UCS Management Tools
      • Cisco UCS Central Software and Architecture
      • Registering Cisco UCS Manager with Cisco UCS Central Software
      • Policy Manager
      • Resource Manager
      • Identifier Manager
      • Operations Manager
      • Summary
      Lesson 4: Module Summary
    Lesson 5: Module Self-Check


Module 7: Cisco UCS C-Series Features

      Lesson 1: Describing Cisco UCS C-Series Servers
      • Cisco UCS C-Series Servers
      • Summary
      Lesson 2: Describing Cisco USC C-Series Server Connectivity Options
      • Cisco UCS 1225 VIC Adapters
      • Managing C-Series Servers as Standalone versus Integrated
      • Cisco UCS C-Series Server Connectivity Options
      • Summary
      Lesson 3: Using Cisco UCS C-Series IMC Discovery
      • Standalone Navigation of Cisco IMC
      • Configuring Cisco IMC Local User Accounts
      • Using the KVM Console
      • Configuring Virtual Media
      • Configuring IPMI
      • Configuring SoL Protocol
      • Full RAID Configuration in Cisco IMC
      • RAID Controller Monitoring and Status
      • Graphical DIMM Representation
      • Configure BIOS in Cisco IMC
      • Mounting NFS or CIFS Media to the Operating System
      • Embedded System Diagnostics
      • Summary
      Lesson 4: Upgrading Cisco UCS C-Series Firmware
      • Downloading Cisco UCS C-Series Firmware
      • Cisco Host Upgrade Utility GUI
      • Summary
      Lesson 5: Module Summary
    Lesson 6: Module Self-Check

 

Lab Outline

Lab 1-1: Initial Cisco UCS Configuration

      Task 1: Configure the Cisco UCS 6200 Series with the Setup Wizard
      Task 2: Configure the Cisco UCS 6200 Series Fabric Interconnect Server Links
      Task 3: Configure the Cisco UCS 6200 Series Fabric Interconnect Uplinks


Lab 1-2: Explore the Cisco UCS Manager GUI

      Task 1: Connect to and Navigate Cisco UCS Manager
      Task 2: Explore the Equipment Tab
      Task 3: Explore the Servers Tab
      Task 4: Explore the LAN Tab
      Task 5: Explore the SAN Tab
      Task 6: Explore the VM Tab
      Task 7: Explore the Admin Tab


Lab 1-3: Configure RBAC

      Task 1: Configure Organizations
      Task 2: Configure Locales
      Task 3: Configure Local Cisco UCS Manager Users
      Task 4: Test Local Users to Validate Locale Restrictions
      Task 5: Configure LDAP for External User Authentication and Authorization
      Task 6: Validate LDAP Role and Locale Mapping
      Task 7: Validate RADIUS Role and Locale Mapping
      Task 8: Configure RADIUS for External User Authentication and Authorization


Lab 2-1: Configure System Related Policies and Uplink Port Properties

      Task 1: Configure the Chassis Discovery Policy and Server Port Channel
      Task 2: Configure a Chassis Connectivity Policy
      Task 3: Configure LAN Uplink Port Channels


Lab 2-2: Configure LAN Related Pools and Policies

      Task 1: Configure VLANs
      Task 2: Configure MAC Address Pools
      Task 3: Configure a QoS System Class and a QoS Policy
      Task 4: Create a vNIC Template for Your Organization
      Task 5: Configure UUID Prefix and Suffix Pools for Your Organization
      Task 6: Configure an Upstream Disjoint Layer 2 Network


Lab 3-1: Configure SAN Connectivity

      Task 1: Configure VSANs
      Task 2: Configure Fibre Channel SAN Uplinks
      Task 3: Configure Fibre Channel Port Channels


Lab 3-2: Configure SAN Identity Pools and Templates

      Task 1: Configure SAN Identity Pools
      Task 2: Configure vHBA Templates
      Task 3: Configure Fibre Channel SAN Boot Policy


Lab 4-1: Configure Server-Related Features and Renaming a Service Profile

      Task 1: Configure a Server Pool Qualification Policy
      Task 2: Create a Service Profile Template for Your Organization
      Task 3: Create a Service Profile from the Updating Template
      Task 4: Create a Host Firmware Package and Include it in a Service Profile Template
      Task 5: Rename a Service Profile


Lab 4-2: Configure a Service Profile that Boots from iSCSI LUN

      Task 1: Configure a Local Storage Policy
      Task 2: Configure the iSCSI VLAN
      Task 3: Configure a Service Profile to Boot from iSCSI LUN
      Task 4: Boot VMware vSphere ESXi 5.1 from iSCSI LUN
      Task 5: Disassociate the iSCSI Service Profile


Lab 5-1: Configure VM-FEX Passthrough Switching

      Task 1: Install VMware ESXi 5.1 on Service Profile East_SP1
      Task 2: Configure a Service Profile for East_SP2
      Task 3: Install VMware ESXi 5.1 on Service Profile East_SP2
      Task 4: Configure a Dynamic vNIC Template
      Task 5: Configure a BIOS Policy
      Task 6: Configure Service Profile Template to Operate East_SP1 in VM-FEX Mode
      Task 7: Configure Service Profile East_SP2 to Operate in VM-FEX Mode
      Task 8: Install Cisco VM-FEX Virtual Ethernet Modules on East_SP1 and East_SP2
      Task 9: Add ESXi Hosts to vCenter Server Inventory
      Task 10: Configure vMotion Port Group on ESXi Host P1-B-ESX.DC.Local
      Task 11: Configure vMotion Port Group on ESXi Host P2-B-ESX.DC.Local
      Task 12: Configure East-VMTraffic Port Group on ESXi Hosts P1-B-ESX.DC.Local and P2-B-ESX.DC.Local
      Task 13: Add Two Microsoft Windows 7 Virtual Machines to P1-B-ESX.DC.Local Inventory
      Task 14: Configure vCenter Integration in Cisco UCS Manager
      Task 15: Add ESXi Hosts to the DVS
      Task 16: Test DirectPath I/O Connectivity Over VM-FEX


Lab 6-1: Back Up and Import the System Configuration

      Task 1: Create a Full State Backup
      Task 2: Create a Configuration Backup
      Task 3: Create an Import Job to Restore a Configuration Backup File


Lab 7-1: Configure Server Settings with the Integrated Management Controller GUITask 1: Verify Network Interface Properties
Task 2: Verify the System Event Log
Task 3: Create Global Hot Spare and Virtual RAID Drives